# \#multiqc

**URL:** https://community.seqera.io/tag/multiqc/35.md?match_all_tags=true&page=2&tags%5B%5D=multiqc

[Latest](https://community.seqera.io/latest.md) · [Categories](https://community.seqera.io/categories.md) · [Tags](https://community.seqera.io/tags.md)

**Page:** 3

---

## [Custom Content + beeswarm : same min/max for all tracks](https://community.seqera.io/t/custom-content-beeswarm-same-min-max-for-all-tracks/955)

<div class="topic-metadata">

**Author:** [@lindenb](https://community.seqera.io/u/lindenb)\
**Replies:** 1\
**Last updated:** [July 20, 2024, 3:08pm UTC](https://community.seqera.io/t/custom-content-beeswarm-same-min-max-for-all-tracks/955 "2024-07-20T15:08:11Z")

</div>

Hi all, this is a beeswarm custom plot What is the config I should use in my mqc.json file, so all the tracks use the same horizontal scale ?

---

## [Customising order of modules](https://community.seqera.io/t/customising-order-of-modules/906)

<div class="topic-metadata">

**Author:** [@Hanjiewu](https://community.seqera.io/u/Hanjiewu)\
**Replies:** 3\
**Last updated:** [July 20, 2024, 3:06pm UTC](https://community.seqera.io/t/customising-order-of-modules/906 "2024-07-20T15:06:45Z")

</div>

I generated a report containing custom content with supported Bakta and QUAST results that are generated by default. By default, modules are included in the report in the order specified in config.module\_order. Any modul…

---

## [Custom content table with 2K+ rows](https://community.seqera.io/t/custom-content-table-with-2k-rows/961)

<div class="topic-metadata">

**Author:** [@jinfinance](https://community.seqera.io/u/jinfinance)\
**Replies:** 4\
**Last updated:** [July 13, 2024, 9:01pm UTC](https://community.seqera.io/t/custom-content-table-with-2k-rows/961 "2024-07-13T21:01:49Z")

</div>

I’m creating a custom content table with many rows… It works as expected with 400+ rows But on a larger data set of 2K+ rows, it changed to this: Is there a default threshold value, 1K ? which triggered this beha…

---

## [Wrong calculation of .metrics file? - Picard](https://community.seqera.io/t/wrong-calculation-of-metrics-file-picard/889)

<div class="topic-metadata">

**Author:** [@Seq11](https://community.seqera.io/u/Seq11)\
**Replies:** 3\
**Last updated:** [June 28, 2024, 4:23am UTC](https://community.seqera.io/t/wrong-calculation-of-metrics-file-picard/889 "2024-06-28T04:23:44Z")

</div>

Hello! I’m new to these analysis so probably my fault… These file are not recognized by multiQC, so I added as a first line: ## METRICS CLASS picard.sam.DuplicationMetrics. At this point I got the following res…

---

## [Custom content table highlight a row below threshold value](https://community.seqera.io/t/custom-content-table-highlight-a-row-below-threshold-value/884)

<div class="topic-metadata">

**Author:** [@jinfinance](https://community.seqera.io/u/jinfinance)\
**Replies:** 2\
**Last updated:** [June 24, 2024, 7:16pm UTC](https://community.seqera.io/t/custom-content-table-highlight-a-row-below-threshold-value/884 "2024-06-24T19:16:12Z")

</div>

Hi, I am trying to highlight a specific row with value below my threshold value in my custom table. How do I do it ? The row I want to highlight is ‘CIMS-CA-020-IH-X9-Test1’ with mean read depth being 2 (threshold v…

---

## [Custom content software version display](https://community.seqera.io/t/custom-content-software-version-display/883)

<div class="topic-metadata">

**Author:** [@jinfinance](https://community.seqera.io/u/jinfinance)\
**Replies:** 1\
**Last updated:** [June 24, 2024, 2:26pm UTC](https://community.seqera.io/t/custom-content-software-version-display/883 "2024-06-24T14:26:53Z")

</div>

Hi, I was wondering if there is a convenient (programmatic) way of displaying software version for custom content (the library that generates it) in the report ? Currently, I manually put in the static value of those ve…

---

## [Custom content](https://community.seqera.io/t/custom-content/873)

<div class="topic-metadata">

**Author:** [@Hanjiewu](https://community.seqera.io/u/Hanjiewu)\
**Replies:** 6\
**Last updated:** [June 24, 2024, 11:27am UTC](https://community.seqera.io/t/custom-content/873 "2024-06-24T11:27:42Z")

</div>

I am excited to run multiqc to generate a custom content report. I installed multiqc (v1.22.2) and it has no problem to generate the bakta report. However, as I ventured to custom content, I downloaded all 3 example file…

---

## [Option run\_modules broken in latest version (1.22.2)](https://community.seqera.io/t/option-run-modules-broken-in-latest-version-1-22-2/864)

<div class="topic-metadata">

**Author:** [@jfnavarro](https://community.seqera.io/u/jfnavarro)\
**Replies:** 7\
**Last updated:** [June 20, 2024, 6:10am UTC](https://community.seqera.io/t/option-run-modules-broken-in-latest-version-1-22-2/864 "2024-06-20T06:10:35Z")

</div>

Hello! If I pass a config file (-c) with the list of modules that I want to run, the modules do not appear in the report. They do appear if I don’t pass the config file. The content of the config file is: run\_modules: …

---

## [Custom content table how to disable default sorting](https://community.seqera.io/t/custom-content-table-how-to-disable-default-sorting/866)

<div class="topic-metadata">

**Author:** [@jinfinance](https://community.seqera.io/u/jinfinance)\
**Replies:** 4\
**Last updated:** [June 19, 2024, 11:24pm UTC](https://community.seqera.io/t/custom-content-table-how-to-disable-default-sorting/866 "2024-06-19T23:24:06Z")

</div>

I’m creating a custom content table and it looks like MultiQC is sorting the table alphanumerically by the 1st column (Sample) by default. How do I turn it off ? I want the samples to be displayed exactly as in my origi…

---

## [Dragen module broken in latest version](https://community.seqera.io/t/dragen-module-broken-in-latest-version/861)

<div class="topic-metadata">

**Author:** [@jfnavarro](https://community.seqera.io/u/jfnavarro)\
**Replies:** 5\
**Last updated:** [June 18, 2024, 9:29am UTC](https://community.seqera.io/t/dragen-module-broken-in-latest-version/861 "2024-06-18T09:29:30Z")

</div>

The dragen plugin seems to be broken in the latest version (1.22.2). It is probably related to the update in the plotting backend. The error message: dragen/dragen\_gc\_metrics.py: Invalid LinePlot plot configuration unr…

---

## [How to process multiple runs of featurecounts in the same directory where each run used a differnt gtf file](https://community.seqera.io/t/how-to-process-multiple-runs-of-featurecounts-in-the-same-directory-where-each-run-used-a-differnt-gtf-file/851)

<div class="topic-metadata">

**Author:** [@pcantalupo](https://community.seqera.io/u/pcantalupo)\
**Replies:** 7\
**Last updated:** [June 15, 2024, 8:27pm UTC](https://community.seqera.io/t/how-to-process-multiple-runs-of-featurecounts-in-the-same-directory-where-each-run-used-a-differnt-gtf-file/851 "2024-06-15T20:27:20Z")

</div>

Hello, I ran two featurecount command lines in the same directory that used the same bam files but using a different GTF file. Therefore, I have featurecounts.tsv and featurecounts\_smORF.tsv. The two sample names are i…

---

## [MultiQC does not find picard rnaseqmetrics files](https://community.seqera.io/t/multiqc-does-not-find-picard-rnaseqmetrics-files/839)

<div class="topic-metadata">

**Author:** [@Govert\_Dwarshuis](https://community.seqera.io/u/Govert_Dwarshuis)\
**Replies:** 1\
**Last updated:** [June 13, 2024, 3:11pm UTC](https://community.seqera.io/t/multiqc-does-not-find-picard-rnaseqmetrics-files/839 "2024-06-13T15:11:10Z")

</div>

Hi! Using default MultiQC, in folder with subfolders per sample, the program does not find rnaseqmetrics files. I checked, and the “# picard.analysis.CollectRnaSeqMetrics” search string that is in the MultiQC documentati…

---

## [Disable mean read length in picard](https://community.seqera.io/t/disable-mean-read-length-in-picard/741)

<div class="topic-metadata">

**Author:** [@complexgenome](https://community.seqera.io/u/complexgenome)\
**Replies:** 2\
**Last updated:** [May 21, 2024, 9:46pm UTC](https://community.seqera.io/t/disable-mean-read-length-in-picard/741 "2024-05-21T21:46:50Z")

</div>

Hi there, I’d like to remove mean read length under the picard report. I’ve my config file as: show\_analysis\_paths: False sp: picard/quality\_by\_cycle: skip: true picard/quality\_by\_cycle: skip: true picard/q…

---

## [Custom Module for MultiQC with Nextflow](https://community.seqera.io/t/custom-module-for-multiqc-with-nextflow/760)

<div class="topic-metadata">

**Author:** [@MTDouglas](https://community.seqera.io/u/MTDouglas)\
**Replies:** 5\
**Last updated:** [May 15, 2024, 6:56pm UTC](https://community.seqera.io/t/custom-module-for-multiqc-with-nextflow/760 "2024-05-15T18:56:24Z")

</div>

Hello! I wrote a custom module for MultiQC and when I run it outside of Nextflow it is able to take in the inputs I expect and produce the table that I expect. However, I am not sure how I can get Nextflow to access thi…

---

## [Show\_analysis\_paths doesn't work](https://community.seqera.io/t/show-analysis-paths-doesnt-work/736)

<div class="topic-metadata">

**Author:** [@complexgenome](https://community.seqera.io/u/complexgenome)\
**Replies:** 3\
**Last updated:** [May 7, 2024, 3:52pm UTC](https://community.seqera.io/t/show-analysis-paths-doesnt-work/736 "2024-05-07T15:52:45Z")

</div>

Hi there, I’m new to multiqc and trying to incorporate few things. I’m interested to disable analysis folder path in the reports. My config.yaml looks like: report\_header\_info: - show\_analysis\_paths: False The inden…

---

## [Parsing both lane split and full run sample names on fastp](https://community.seqera.io/t/parsing-both-lane-split-and-full-run-sample-names-on-fastp/687)

<div class="topic-metadata">

**Author:** [@Tony\_Brooks](https://community.seqera.io/u/Tony_Brooks)\
**Replies:** 3\
**Last updated:** [May 6, 2024, 8:19pm UTC](https://community.seqera.io/t/parsing-both-lane-split-and-full-run-sample-names-on-fastp/687 "2024-05-06T20:19:49Z")

</div>

Hello We run our NovaSeq in both XP mode (split by lane) and standard mode (same samples over all lanes). This results in filenames in two basic syntaxes from BCL Convert: SampleName\_S123\_R1\_001.fastq.gz SampleName\_S1…

---

## [Cutadapt module plot classification of adapters](https://community.seqera.io/t/cutadapt-module-plot-classification-of-adapters/712)

<div class="topic-metadata">

**Author:** [@salias](https://community.seqera.io/u/salias)\
**Replies:** 3\
**Last updated:** [May 6, 2024, 12:30pm UTC](https://community.seqera.io/t/cutadapt-module-plot-classification-of-adapters/712 "2024-05-06T12:30:40Z")

</div>

Hello, I’m using MultiQC in my Cutadapt logs. My Cutadapt command looks like this (wildcards {} are due to Snakemake being my workflow management system): cutadapt \\ {input.fq\_f} \\ {input.fq\_r} \\ --front Primer\_F…

---

## [New module in Multiqc not launching](https://community.seqera.io/t/new-module-in-multiqc-not-launching/732)

<div class="topic-metadata">

**Author:** [@LouisLeNezet](https://community.seqera.io/u/LouisLeNezet)\
**Replies:** 4\
**Last updated:** [May 3, 2024, 11:29am UTC](https://community.seqera.io/t/new-module-in-multiqc-not-launching/732 "2024-05-03T11:29:13Z")

</div>

Hi ! The PR is now ready for one of the files generated by GLIMPSE2\_concordance. The problem I’m having is that multiqc doesn’t seem to launch the module created (I put a log.info at the start of the init). It may be …

---

## [Adding glimpse support](https://community.seqera.io/t/adding-glimpse-support/662)

<div class="topic-metadata">

**Author:** [@LouisLeNezet](https://community.seqera.io/u/LouisLeNezet)\
**Replies:** 4\
**Last updated:** [April 17, 2024, 1:29pm UTC](https://community.seqera.io/t/adding-glimpse-support/662 "2024-04-17T13:29:25Z")

</div>

Hi ! I’m working to add support to the Glimpse concordance analysis tool. I’ve added some test-data to the MultiQC repository but I’m not sure they are sufficient. Should I run a bigger analysis to have more data to …

---

## [How do I make categorical values from integers?](https://community.seqera.io/t/how-do-i-make-categorical-values-from-integers/594)

<div class="topic-metadata">

**Author:** [@lskatz](https://community.seqera.io/u/lskatz)\
**Replies:** 5\
**Last updated:** [May 1, 2024, 11:41pm UTC](https://community.seqera.io/t/how-do-i-make-categorical-values-from-integers/594 "2024-05-01T23:41:56Z")

</div>

Hi, I have a custom table with MLST results. MLST results include sequence types which appear numerical but are actually strings. Can put in some custom yaml to make it not highlight the values in the report? Thank you f…

---

## [Cannot seem to find metrics files when using picard CollectMultipleMetrics](https://community.seqera.io/t/cannot-seem-to-find-metrics-files-when-using-picard-collectmultiplemetrics/719)

<div class="topic-metadata">

**Author:** [@yfarjoun](https://community.seqera.io/u/yfarjoun)\
**Replies:** 5\
**Last updated:** [April 30, 2024, 8:45pm UTC](https://community.seqera.io/t/cannot-seem-to-find-metrics-files-when-using-picard-collectmultiplemetrics/719 "2024-04-30T20:45:08Z")

</div>

Hi, I’ve been collecting metrics using Picard “CollectMultipleMetrics” and using the output in multiqc. The report manages to process several of the input files, but not all. In particular, I have generated RnaSeqMetric…

---

## [Adding legend to somalier PCA plots](https://community.seqera.io/t/adding-legend-to-somalier-pca-plots/637)

<div class="topic-metadata">

**Author:** [@aarthi-mohan](https://community.seqera.io/u/aarthi-mohan)\
**Replies:** 3\
**Last updated:** [April 22, 2024, 7:30pm UTC](https://community.seqera.io/t/adding-legend-to-somalier-pca-plots/637 "2024-04-22T19:30:01Z")

</div>

Hi there! Thanks for the wonderful tool. I am running MultiQC on somalier output and it seems the PCA plot does not have a legend. Is this normal? Here is an example figure

---

## [FastQC read quality scores in general stats table](https://community.seqera.io/t/fastqc-read-quality-scores-in-general-stats-table/673)

<div class="topic-metadata">

**Author:** [@lskatz](https://community.seqera.io/u/lskatz)\
**Replies:** 5\
**Last updated:** [April 19, 2024, 7:42pm UTC](https://community.seqera.io/t/fastqc-read-quality-scores-in-general-stats-table/673 "2024-04-19T19:42:16Z")

</div>

Hi, I want to have quality scores on the general statistics line for my Illumina raw read files. I wanted to have a Q score for each R1 and R2. How would I do that best? Right now, I have it with FastQC, but R1 and R2 a…

---

## [BV-BRC Kraken 2 error](https://community.seqera.io/t/bv-brc-kraken-2-error/668)

<div class="topic-metadata">

**Author:** [@Dhanya\_Binish](https://community.seqera.io/u/Dhanya_Binish)\
**Replies:** 1\
**Last updated:** [April 18, 2024, 7:51am UTC](https://community.seqera.io/t/bv-brc-kraken-2-error/668 "2024-04-18T07:51:01Z")

</div>

Hi, I am getting the following error message in screen shot below,even though generates a report , but in alternate way with before trimmed reads and after trimmed reads mixed together .

---

## [Kraken report gives an error](https://community.seqera.io/t/kraken-report-gives-an-error/666)

<div class="topic-metadata">

**Author:** [@lskatz](https://community.seqera.io/u/lskatz)\
**Replies:** 1\
**Last updated:** [April 17, 2024, 8:12pm UTC](https://community.seqera.io/t/kraken-report-gives-an-error/666 "2024-04-17T20:12:30Z")

</div>

Hi, I am getting no errors so far. But when I add a kraken report file, I get the following error. (sneakernet) \[gzu2@monolith3 MultiQC-build\]$ multiqc . --force /// MultiQC � | v1.17 | multiqc | Search pa…

---

## [Properly rendering MultiQC reports in a Shiny app](https://community.seqera.io/t/properly-rendering-multiqc-reports-in-a-shiny-app/597)

<div class="topic-metadata">

**Author:** [@nick-youngblut](https://community.seqera.io/u/nick-youngblut)\
**Replies:** 5\
**Last updated:** [April 3, 2024, 2:32pm UTC](https://community.seqera.io/t/properly-rendering-multiqc-reports-in-a-shiny-app/597 "2024-04-03T14:32:47Z")

</div>

I created a Shiny app that allows users to easily view MultiQC reports that are scattered across a GCP Cloud Storage bucket. My app uses the googleCloudStorageR package to read in each html report as a string, and then …

---

## [Dynamically change button name for reports that have percentages and counts/number\_of\_reads](https://community.seqera.io/t/dynamically-change-button-name-for-reports-that-have-percentages-and-counts-number-of-reads/543)

<div class="topic-metadata">

**Author:** [@whattonameit](https://community.seqera.io/u/whattonameit)\
**Replies:** 4\
**Last updated:** [March 7, 2024, 6:39am UTC](https://community.seqera.io/t/dynamically-change-button-name-for-reports-that-have-percentages-and-counts-number-of-reads/543 "2024-03-07T06:39:43Z")

</div>

Hi @ewels @vlad.savelyev I am using MultiQC 1.21 and I see that certain plots/images that have both percentages and reads/counts are missing the button for “reads/counts”. 1.21 Picard Mark Duplicates 1.19 Picard Ma…

---

## [How to add violin plot toggle to all MultiQC tables](https://community.seqera.io/t/how-to-add-violin-plot-toggle-to-all-multiqc-tables/541)

<div class="topic-metadata">

**Author:** [@whattonameit](https://community.seqera.io/u/whattonameit)\
**Replies:** 2\
**Last updated:** [March 3, 2024, 7:52pm UTC](https://community.seqera.io/t/how-to-add-violin-plot-toggle-to-all-multiqc-tables/541 "2024-03-03T19:52:48Z")

</div>

Hi @ewels In this blog post MultiQC: A fresh coat of paint | Seqera you mention that As of MultiQC v1.20, any table can be shown as a violin plot with a simple toggle button in the report, no matter the number of samp…

---

## [Extra line in header table in version 1.19 & 1.20](https://community.seqera.io/t/extra-line-in-header-table-in-version-1-19-1-20/516)

<div class="topic-metadata">

**Author:** [@yfarjoun](https://community.seqera.io/u/yfarjoun)\
**Replies:** 3\
**Last updated:** [February 27, 2024, 10:42pm UTC](https://community.seqera.io/t/extra-line-in-header-table-in-version-1-19-1-20/516 "2024-02-27T22:42:21Z")

</div>

I’m seeing this in v1.19 & v1.20 (but not in 1.14, haven’t tried the versions in between) there seems to be a problem with how a custom logo interacts with the information in the report\_header\_info. the following yaml …

---

## [Modifying the format for all columns in a custom table](https://community.seqera.io/t/modifying-the-format-for-all-columns-in-a-custom-table/505)

<div class="topic-metadata">

**Author:** [@yfarjoun](https://community.seqera.io/u/yfarjoun)\
**Replies:** 1\
**Last updated:** [February 19, 2024, 6:14pm UTC](https://community.seqera.io/t/modifying-the-format-for-all-columns-in-a-custom-table/505 "2024-02-19T18:14:02Z")

</div>

I understand that one can use format to modify any given column as documented here. I am however adding a table with many columns of similar type (pc-loadings) and I’d like to set the default format to “{:,.2f}”. How ca…

[Previous page](https://community.seqera.io/tag/multiqc/35.md?match_all_tags=true&page=1&tags%5B%5D=multiqc)

[Next page](https://community.seqera.io/tag/multiqc/35.md?match_all_tags=true&page=3&tags%5B%5D=multiqc)
